MAX USA CORP Superframer CN890F2 Framing Coil Nailer up to 3-1/2″

MAX USA CORP Superframer CN890F2 Framing Coil Nailer up to 3-1/2"

    Features:

  • Anti-double Fire mechanism
  • Ultra light weight only 7.7 lbs
  • Dial adjustable depth control
  • Tangle free swivel plug
  • Easy coil load MAGAZINE
  • No-mar contact tip
  • Aggressive nose for toe nailing
  • Short height design only 13 1/2″
  • Rafter hook

MAX USA CORP SuperSider CN565S3 Siding Coil Nailer up to 2-1/2″

MAX USA CORP SuperSider CN565S3 Siding Coil Nailer up to 2-1/2"

    Features:

  • Slim guide contact arm
  • Anti-double Fire mechanism
  • Maintenance free end cap filter ; Easy-nail-load magazine, rafter hook and protective carrying case.
  • Easy twist adjustable deflector ;
  • Easy 360 degree twist adjustable exhaust deflector allows the user to easily divertexhaust air away from them self without any tool.

MAX USA CORP SuperRoofer CN445R3 Roofing Coil Nailer up to 1-3/4″

MAX USA CORP SuperRoofer CN445R3 Roofing Coil Nailer up to 1-3/4"

    Features:

  • REDUCED TAR BUILD UP: Tar resistant nose is designed to resist tar 8x longer than conventional tools. When necessary, the SuperRoofer’s contact foot is easy to remove, clean and is also inexpensive to replace.
  • SELF-CLEANING FILTER FOR RELIABLE OPERATIONS: The patented, self-cleaning maintenance free end cap filter, captures foreign substances before they can enter the tool and automatically safely ejects them when the air hose is disconnected.
  • SIMPLE TOOL MAINTENANCE: A removable contact foot allows roofers to safely maintain and clean components of the tool without having to submerge the tool in corrosive cleaning agents.
  • NO NAIL WASTE OR JAMS: A nose magnet holds the last nail in place, allowing contractors to use every nail in the coil; it also prevents the tool from jamming.
  • CONSISTENTLY AND ACCURATELY SHOOTS NAILS: The depth adjustment dial allows operators to effortlessly drive nails into hard materials, and also control depth of drive when fastening soft materials, for a consistently polished finish.
  • AVOID TRIP HAZARDS: A tangle free swivel fitting prevents tangling of the hose while keeping roofers safe from potential fall hazards.
  • EXTREME DRIVING POWER: Full round head driver blade for better holding power.

MAX USA CORP SuperFramer SN883RH3 21 Degree Framing Full Round Head Stick Nailer up to 3-1/4″

MAX USA CORP SuperFramer SN883RH3 21 Degree Framing Full Round Head Stick Nailer up to 3-1/4"

    Features:

  • Lightweight only 7 lbs
  • Nose magnet holds last nail
  • Maintenance free end cap filter
  • Tangle free swivel plug
  • Aggressive nose for toe nailing
  • Open nose for easy jam clearance
  • Dial adjustable depth control
  • Heavy duty steel rafter hook

MAX USA CORP. MAX USA PowerLite HN90F High Pressure Framing Coil Nailer up to 3-1/2″, red/black/silver

MAX USA CORP. MAX USA PowerLite HN90F High Pressure Framing Coil Nailer up to 3-1/2", red/black/silver

    Features:

  • Patented maintenance free end cap filter prevents foreign substances from entering the tool.
  • High power. Has enough power to drive nails through LSL & LVL.
  • Lightweight- only 5.7 lbs. Approx. 40% lighter than most competitor’s tools without sacrificing power.
  • Wire or plastic 15 Degree collation
  • 1 3/4″ To 3 1/2″ Length nails
  • Tangle free swivel plug to alleviate the tangling of the air hose no matter what angle The tool is being held.
  • Load capacity of 300 nails. Shoots up to a 3 1/2″ Nail.

Max CN70 1-3/4-Inch to 2-3/4-Inch Heavy Duty Coil Nailer for Siding

Max CN70 1-3/4-Inch to 2-3/4-Inch Heavy Duty Coil Nailer for Siding

    Features:

  • Extra heavy-duty: Die cast aluminum construction
  • Rugged magazine
  • Drives 225-300 nails continuously by full-loading
  • Multi-directional exhaust
  • Comfortable rubber grip

Max CN55 1-Inch to 2-1/4-Inch Coil Nailer

Max CN55 1-Inch to 2-1/4-Inch Coil Nailer

    Features:

  • Extra heavy-duty: Die cast aluminum construction
  • Light weight
  • Rugged magazine
  • Drives 300 – 350 nails continuously by full-loading
  • Multi-directional exhaust

MAX USA CORP SuperLocator SN438J Metal Connector Nailer up to 1-1/2″

MAX USA CORP SuperLocator SN438J Metal Connector Nailer up to 1-1/2"

    Features:

  • STURDY CONTACT ARM: A beefed-up contact arm provides greater protection from breakage due to nail jams and accidental dropping of the tool. This contact arm is built to last.
  • PROTECTION AGAINST DRY FIRES: An anti-dry fire mechanism allows the tool to sense low nail level to prevent damage to the tool from dry firing.
  • PROTECTION AGAINST DOUBLE FIRES: An anti-double fire nose has an extruded metal tip that prevents a 2nd nail from accidentally being shot when the 1st nail is firmly pressed against the wood surface.
  • NO OBSTRUCTION TO VISBILITY WHEN PLACING FASTENERS INTO CONNECTOR HOLES: The precision nose exposes the nail tip to allow the precise application of fasteners into the connectors.
  • SELF-CLEANING FILTER FOR RELIABLE OPERATIONS: The patented, self-cleaning maintenance free end cap filter captures foreign substances before they can enter the tool and automatically ejects them when the air hose is disconnected.
  • HIGH PERFORMANCE DRIVER BLADE: A denser driver blade provides 1.7 times more durable than competitive driver blades.
  • PROTECT YOUR FACE FROM EXHAUST: The 360 degree rotating exhaust deflector allows users to safely divert exhaust air and fumes away from their face.

MAX USA SuperFramer SN883CH2/28 28 Degree Framing Offset/Clipped Head Stick Nailer up to 3-1/4″””

MAX USA SuperFramer SN883CH2/28 28 Degree Framing Offset/Clipped Head Stick Nailer up to 3-1/4"""

    Features:

  • Lightweight only 7.8 lbs
  • Anti-double Fire mechanism
  • Maintenance free end cap filter
  • Dial adjustable depth control
  • Tangle free swivel plug
  • Heavy duty rafter hook
  • Aggressive nose for toe nailing
  • Open nose for easy jam clearance
  • Trigger lock
  • Wire or paper, 28 Degree, 2″ To 3 1/4″ Length nails

As an Amazon Associate I earn from qualifying purchases.

Random products:

ftg countersink drill bit set
amk mig-31