Jet JMD-18 350018 230-Volt 1 Phase Milling/Drilling Machine

Jet JMD-18 350018 230-Volt 1 Phase Milling/Drilling Machine

    Features:

  • Hinged belt cover allows faster speed changing
  • 9 1/2 by 31 3/4 inch worktable
  • 2 hp, 1 phase, 230 volt only motor
  • Heavy duty tapered roller bearings’ support the spindle
  • Stand not included

JET 350017/JMD-15 Milling/Drilling Machine

JET 350017/JMD-15 Milling/Drilling Machine

    Features:

  • R-8 SPINDLE TAPER
  • FAST BELT ADJUSTMENTS: Belt cover with quick slide latch allows for easy spindle speed changes.
  • UL-LISTED 1-HP MOTOR
  • ADDED SUPPORT: One-piece cast iron column.
  • 360° HEAD SWIVEL
  • DRILL CHUCK GUARD

200W CNC Mini Lathe Machine Tool DIY Woodworking Wood lathe Milling machine Grinding Polishing Beads Drill Rotary Tool Set

200W CNC Mini Lathe Machine Tool DIY Woodworking Wood lathe Milling machine Grinding Polishing Beads Drill Rotary Tool Set

    Features:

  • Specially designed for the home DIY enthusiasts and hobbies,small and portable size with strong power.
  • Super large torque ball bearing motor, maximum rotating speed up to 8000RPM providing ultra strong cutting power with low noise, you can use it at home.
  • Transparent organic dustproof glass cover with super convective cooling hole, the welding line is covered with a full heat shrinkable tube.
  • With 7 levels of power adapter enable you to adjust the rotating speed easily to meet different cutting speed.
  • High quality aluminum alloy base and pure steel structure drill chuck.

Masuter 4040 CNC Router Machine, 3-Axis Engraving Milling Machine 15.75×14.96” Working Area for Carving Cutting Wood Acrylic MDF Nylon

Masuter 4040 CNC Router Machine, 3-Axis Engraving Milling Machine 15.75x14.96” Working Area for Carving Cutting Wood Acrylic MDF Nylon

    Features:

  • Masuter 4040 is a budget-friendly CNC router with large working area of 400 x 380 x 55mm (15.75” x 14.96” x 2.16”). It uses a 60W spindle and NEMA17 stepper motors. Max moving speed is 2000mm/min and spindle speed range is 0~10000.
  • The control board is equipped with an upgraded 32-bit chip which works more efficient and stable. It also supports add-ons such as offline controller, 300W spindle and power modules. (Add-ons sold separately)
  • Masuter 4040 is capable to engrave, cut and drill many kinds of material such as wood, MDF, acrylic and resin etc. Recommended settings: speed-1000mm/min; depth per pass-0.2mm; plunge rate-200mm/min.
  • HOME function and Emergency-Stop button are integrated on the machine. The machine will go to home with simply press the button.
  • Main parts are pre-assembled. It takes about 20-30mins to fully assembly. The machine is compatible with Grbl software. It supports Windows XP/7/10, Linux and Mac OS.

PROXXON MICRO Mill MF 70, 37110

PROXXON MICRO Mill MF 70, 37110

    Features:

  • Small and beautiful – the accurate mill for lab, optician, jewelry, electronic and model building projects
  • Supplied with a stable base of cast iron, vertical column and compound table are of treated, high quality aluminum
  • All axes are play-free and have adjustable slides, headstock, made of die-cast aluminum
  • Balanced special motor and provides stability even at high operating speeds
  • Scope of delivery: 1x PROXXON MICRO Mill MF 70 including MICROMOT steel collet set and stepped clamp blocks of steel. Part number: 37110

WEN 33013 4.5A Variable Speed Single Phase Compact Benchtop Milling Machine with R8 Taper

WEN 33013 4.5A Variable Speed Single Phase Compact Benchtop Milling Machine with R8 Taper

    Features:

  • Variable speed goes anywhere from 100 to 1,100 RPM on the low setting and 100 to 2,500 RPM on the high setting
  • 18-1/8 x 4-3/4 inch table travels 11-13/16 inches along the X-axis and 5-1/8 inches along the Y-axis
  • Bevel the head and column 45 degrees in either direction for angled cuts in metal, wood, plastic and more
  • Compact cast iron design measures in at 23-1/4 by 22 by 29-1/2 inches in size with an 8-1/2 by 15 inch foot print
  • Includes an R8 spindle taper, a pre-installed drill chuck (1/32 to 1/2 inch), fine-tune adjustment hand wheels, a transparent chuck guard, an emergency stop button, onboard measurement indicators, a 13-inch swing, two M10-1.5 T-nuts, 12mm T-slots, and a two-year warranty

CNC Router Machine 4040-XE, 300W Spindle 3-Axis Engraving Milling Machine for Wood Metal Acrylic MDF Nylon Carving Cutting Arts and Crafts DIY Design

CNC Router Machine 4040-XE, 300W Spindle 3-Axis Engraving Milling Machine for Wood Metal Acrylic MDF Nylon Carving Cutting Arts and Crafts DIY Design

    Features:

  • 4040-XE CNC Router uses 300W spindle and NEMA23 stepper motors, which are more powerful and efficient. Max moving speed is 2000mm/min and spindle speed range is 0~10000.
  • Control board, power supply, emergency stop, and wires are integrated into a newly design box, which is simple for operation, easy to clean and safe. The controller has a 3.5” touchscreen LCD which also functions as an offline controller. The input voltage is 110V.
  • It’s capable to engrave, cut and drill many different kinds of material such as wood, metal, MDF, acrylic, foam, resin, nylon, carbon fiber, PCB and etc. It’s great for home use and business.
  • Large engravable area of 15.75”x15.75”x2.56” (400x400x65mm). It’s capable to handle both small and large material. The CNC machine is based on GRBL, it is compatible with GRBL-control software.
  • Easy assembly. Main parts are pre-assembled, it only takes 15-30mins to fully assembly. Wires are labeled clearly for fast connection and bundled into drag chain for easy management.

SHOP FOX M1036 Micro Milling Machine, Small

SHOP FOX M1036 Micro Milling Machine, Small

    Features:

  • Item may ship in more than one box and may arrive separately
  • Motor: 0.2 HP, 2A, 110 Volt, single-phase
  • Drilling capacity: 1/4-Inch
  • Spindle taper: JT1
  • Spindle travel: 1-1/2-Inch
  • Table size: 3-1/2-Inch by 8-Inch.Low speed range:0-3600,High speed range: 0-500

Grizzly Industrial G0602-10″ x 22″ Benchtop Metal Lathe

Grizzly Industrial G0602-10" x 22" Benchtop Metal Lathe

    Features:

  • Swing over bed: 9-1/2″
  • Swing over cross slide: 6-1/8″
  • Distance between centers: 22″
  • Spindle bore: 25mm
  • Spindle thread: 1-3/4″ x 8 TPI

As an Amazon Associate I earn from qualifying purchases.

Random products:

sd to ide
huwaei mate 20 pro