In The Swim Super Poxy Shield Epoxy-Base Swimming Pool Paint – Pool Blue 1 Gallon
- Ideal for use on Plaster, Gunite, Concrete, and Fiberglass gel-coat surfaces
- A single application can last up to 7 – 8 years
- Delivers a stain-resistant, tile like finish
- Please Note: Epoxy Primer is required for new applications
- Coverage: 125 – 150 sq ft per gallon on average
Features:
In The Swim Epoxy Primer for Epoxy-Base Swimming Pool Paints – 1 Gallon
- Seals and preps pool interior for paint
- Thoroughly clean pool surface with surface cleaner before applying
- Required for resurfacing smooth plaster, smooth concrete or fiberglass gel-coat pools
- Epoxy Prime can be applied to damp surfaces
- Coverage: 200 – 250 sq ft per gallon on average
Features:
In The Swim Gunite Primer for Epoxy-Base Swimming Pool Paints – 1 Gallon
- Two-part epoxy primer
- Used for fiberglass, rough plaster, rough concrete, new gunite or sandblasted surfaces
- Heavy viscosity to fill imperfections in rough surfaces
- Applied with a paint roller
- Coverage: Approximately 100-150 square feet per gallon
Features:
In The Swim CRC Pro-Series Chlorinated Rubber-Base Pool Paint – Pool Blue 1 Gallon
- Designed to be used as an upgrade for previously painted rubber-base finishes
- Self Priming two coats suggested for initial application
- Yielding a 3 year average life
- Applied with a paint roller
- Coverage : 250 square feet per gallon on average
Features:
In The Swim Envirolon Rubber-Base Pool Paint – Pool Blue 1 Gallon
- Apply to bare concrete or plaster surfaces over old rubber base coatings
- Two coats suggested for initial application
- Yielding a 2 – 3 year average life
- Rubber-Base Pool Paint is applied with a paint roller
- Coverage : 250 square feet per gallon on average
Features:
In The Swim Envirolon Rubber-Base Pool Paint – White 1 Gallon
- Apply to bare concrete or plaster surfaces over old rubber base coatings
- Two coats suggested for initial application
- Yielding a 2 – 3 year average life
- Rubber-Base Pool Paint is applied with a paint roller
- Coverage : 250 square feet per gallon on average
Features:
In The Swim Aqua Coat Water-Base Swimming Pool Paint – Pool Blue 1 Gallon
- Can be applied to a bare surface or to cover rubber base coating
- Self-Priming qualities
- Applied with a paint roller
- 2 coats required for best results
- Coverage: 250 – 300 sq ft per gallon on average
Features:
In The Swim Patio and Deck Paint White – 1 Gallon
- Excellent for restoration of concrete surfaces
- Leaves a Non-Slip Finish when dry
- Can be applied to a damp surface
- Two coats required on initial application
- Coverage: 90 – 125 sq ft per gallon depending on surface porosity
Features:
In The Swim Pool Paint Preparation Surface Cleaner TriSodium Phosphate – 4 Pounds
- Surface preparation before painting
- Water rinse to neutralize
- Strong pool surface cleaner removes dirt, grease and oils
- Active Ingredient: Trisodium Phosphate Dodecahydrate 98 – 100%
- Coverage: Mix 8 oz of TSP per 1 gallon of water to wash 100 sq ft
Features:
In The Swim Advance Plus Rubber-Base to Epoxy-Base Pool Paint Conversion Coating
- Rubber Base Interior Lifespan: 2 – 3 years
- Epoxy Base Interior Lifespan: 7 – 8 years
- Interior upgrade Conversion
- Converts rubber-base coatings to allow for new epoxy-base coating
- Coverage: Approximately 200-250 square feet per gallon
Features:
As an Amazon Associate I earn from qualifying purchases.
