Rockville RPA16 10000 Watt Peak / 3000w RMS 2 Channel Power Amplifier Pro/DJ Amp
- Features of RPA16: Rockville RPA16 10, 000 Watt Peak 2 Channel Professional/DJ Rack Mount Amplifier, LCD displays volume in dB per channel and operating temperature, 2U rack space, Built in limiter protects your speakers from distortion and clipping, Bridged mode allows you to combine both channels power into one channel for use with a subwoofer, Stereo mode is perfect for (2) speakers or (4) speakers in a left and right configuration.
- Parallel mode gives you dual mono output signal which is perfect for monitor use when you want all sounds coming out of each speaker instead of a left/right configuration, Built in crossover switch (bypass, 80 Hz, 160 Hz) allows amp to be used with full range PA speakers, or Subwoofer(s), Channel A & B Clipping Led Indicators, Channel A & B Separate Level Controls, Power, signal, clipping, and protection LED indicators on front of amp, Heavy duty rack mount ears with handles.
- Built-in variable high velocity quiet cooling fans, Maximum headroom for 4-ohm and 8-ohm Speakers, Level controls for precise setting and matching of sensitivity, Computer controlled IC protection circuitry against speaker short circuit, thermal over load, DC over load, User serviceable fuse (25A, 250V), Frequency Response (bandwidth @ 2Vrms out, @ -3. 0dB) 10 Hz – 30 Khz, THD + Noise @ 1Khz full power: <0. 04%, Input Impedance: 10K Ohm Balanced, Input signal voltage: 660mV – 1. 5V.
- Input sensitivity: 0. 7v, Damping factor: ( 100Hz, 10w, 4 ohms): 36. 5, Damping factor: (1Khz @ 8 ohm): >400: 1, Effective damping factor (100Hz, 10w, 4 Ohms) 1. 08, Output impedance at speaker terminals: 0. 10975 Ohms, Frequency Response vs THD+N (worst case, across normal bandwidth 1W) 0. 6%, Signal to Noise Ratio: > 100dB, IMD 60Hz & 1kHz, 4: 1: <0. 04%, SLEW RATE (input filter limited) : 40v/uS, Power Requirements: 120V / 50-60Hz, Weight: 40. 8 lbs, Dimensions: 19. 09 x 16. 93 x 3. 35 inch.
- Power Ratings of RPA16: RMS Power Output: Stereo 8 Ohm: 2 x 1000W, Stereo 4 Ohm: 2 x 1500W, Bridged 8 Ohm: 1 x 3000W. Peak Power Output: Stereo 4 Ohm: 2 x 5000W Max, Bridged 8 Ohm: 1 x 10000W Max.
Features:
Peavey IPR2 2000 Lightweight Power Amp
- 2- Channel independent fourth-order Linkwitz-Riley crossovers
- DDT
- Revolutionary IPR class D topology
- Detented input controls
- Speakon output connectors
Features:
2 Channel 4500 Watts Professional DJ PA Power Amplifier 2U Rack mount SYS-4500 MUSYSIC
- ATR (Accelerated Transient Response) technology for ultimate punch and clarity
- 4500 watts of Instant Peak Power (750 watts RMS)
- XLR, ¼” (6.5mm Jack) Balanced Inputs
- Speakon and Banana binding post Outputs
- Front-to-Rear Airflow and Dual Cooling Fans
Features:
Seismic Audio – SALWR2S – Lightweight 2 Space Compact ABS Rack Case – 2U PA DJ Amp Effects Shallow Rack Case
- Model # SALWR2S | Lightweight ABS 2 Space Rack Case | Standard 19″ Mounting Rail Width
- Outer Dimensions with Doors On: Height: 5 1/2″ – Width: 14″ – Depth: 21″
- Inside Dimensions: Mounting Space: 2U – 3.50″ | Rail to Back with Rear Door On: 10 5/8″ | Front Rail to Rear Rail: 8″
- Lightweight Polyethylene with aluminum rails | Screws and Washers Included | Front and rear removable doors (1 Door has a Screen Pocket on inside)
- Heavy Duty Butterfly Twist Latches | Dual spring handles on each side
Features:
Gemini GPA-6000 5000W Professional DJ Power Amplifier
- CLEAN AND DEPENDABLE AMPLIFICATION: This Gemini GPA-6000 Professional Power Amplifier Provides Clean and Reliable Amplification Without Any Clipping, Featuring a Rugged Design with 5000 Watts of Peak Power.
- PERFECT DIMENSIONS: The Power Amplifier Measures 8” inches L x 5” inches W x 12” inches H and Weighs 25.3 lbs. Made of Durable and Lightweight Metal Chassis.
- RUGGED DESIGN: Features a Durable Metal Construction with Safety Thermal and Short Circuit Protection for Reliability Even on Adverse Conditions on the Stage. Comes with Front-to-Rear Airflow Fans.
- EXTREME PERFORMANCE: Features A Frequency Response Of 10Hz-50kHz at 1.5dB, Total Harmonic Distortion of Less Than 0.1%, and Input Sensitivity and Impedance of 0.77v. This is Designed to Deliver Pure and Consistent Wattage Everytime.
- Features XLR and 1/4-inch Jack Balance, Stereo and Mono Bridge, Comprehensive Front Panel Indicators (Including Signal, Clip, Protect, and Bridge), and a Bridge Control Switch.
Features:
MUSYSIC Professional 2 Channel 7000 Watts DJ PA Power Amplifier Signal out MU-P7K
- Stereo Output Power: “2x4000W PEAK, 2x2000W Program, 2x1000W RMS @2Ω” “2x2000W PEAK, 2x1000W Program, 2x500W RMS @4Ω” “2x1000W PEAK, 2x500W Program, 2x250W RMS @8Ω”
- Bridge Output Power: “4000W PEAK, 2000W Program, 1000W RMS @4Ω” “2000W PEAK, 1000W Program, 500W RMS @8Ω”
- Frequency Response: 20Hz-20KHz,+0,-1dB at watts / THD+N(20Hz-20KHz) : ＜0.23％20Hz-20KHz / Siew Rate ＞30V/us / Damping Factor ＞150 / Output Circuitry: Class AB / Signai to Noise Ratio ≥96dB / Cross Talk ＞80dB / lnput Sensitivity(8Ω) 1V /
- Connectors: Input: XLR input, 1/4″ input: XLR Output: Speakon connector Output: Speakon, locking type socket, Banana plug connection output
- Dual cooling fans / Controls Panel: the power switch, channel 1 and channel 2 channel gain control; After the board: working mode, pressure limit. / lndicators Panel: the power switch, channel 1 and channel 2 channel gain control; After the board: working mode, pressure limit. / Amplifier Protection With short circuit, overload, overheat, cut peak pressure limit, dc, soft start, relay zero current switch, super audio and radio frequency protection device.
Features:
GTD-Audio 16 Channel Professional Powered Mixer Power Amplifier DJ Amplifier, USB, EQ, Effect
- 6000w output Maximum , 2000w output Average RMS @ 4 ohms
- 3000w output Maximum, 1000w output Average RMS @ 8 ohms
- 16 channel, with onboard 16 type professional effect, 16 mic/line channels with 48v phantom power for condenser microphone
- 2 stereo inputs with dual RCA for flexible connectivity
- 3-band EQ on each channel and 7-band graphic EQ on the main
Features:
Gemini GPA-2500 3000W Professional DJ Power Amplifier
- CLEAN AND DEPENDABLE AMPLIFICATION: This Gemini GPA-2500 Professional Power Amplifier Provides Clean and Reliable Amplification Without Any Clipping, Featuring a Rugged Design with 2000 Watts of Peak Power.
- PERFECT DIMENSIONS: The Power Amplifier Measures 8” inches L x 5” inches W x 12” inches H and Weighs 17.6 lbs. Made of Durable and Lightweight Metal Chassis.
- RUGGED DESIGN: Features a Durable Metal Construction with Safety Thermal and Short Circuit Protection for Reliability Even on Adverse Conditions on the Stage. Comes with Front-to-Rear Airflow Fans.
- PURE PERFORMANCE: Features A Frequency Response Of 10Hz-50kHz at 1.5dB, Total Harmonic Distortion of Less Than 0.1%, and Input Sensitivity and Impedance of 0.77v. This is Designed to Deliver Pure and Consistent Wattage Everytime.
- Features XLR and 1/4-inch Jack Balance, Stereo and Mono Bridge, Comprehensive Front Panel Indicators (Including Signal, Clip, Protect, and Bridge), and a Bridge Control Switch.
Features:
MUSYSIC 2 Channel 3200 Watts DJ PAProfessional Power Amplifier 2U Rack mount SYS-3200
- ATR (Accelerated Transient Response) technology for ultimate punch and clarity
- 3200 watts PMPO, 1600W@2Ohms,800W@4Ohms,400W@8Ohms
- XLR, ¼” (6.5mm Jack) Balanced Inputs
- Speakon and Banana binding post Outputs
- Front-to-Rear Airflow and Dual Cooling Fans
Features:
QSC RMX1450a Stereo Power Amplifier
- Requires 2 rackspaces
- 1/4″ TRS, XLR, and barrier strip balanced inputs
- Binding post and Neutrik Speakon outputs
- Front-mounted gain controls for easy access
- Independent and defeatable clip limiters
Features:
As an Amazon Associate I earn from qualifying purchases.
