BILT HARD 8 in. Drill Press, 5-Speed Benchtop Drill Press with Worklight, Vise and Drill Bit Set
- Small but Powerful: 8 inch swing, 2 inch spindle travel, 1/2-inch keyed chuck, 2.4A induction motor(1/3 HP), which is mini but mighty enough to drill through metal, wood, plastics, and other materials for both the job and the garage.
- 5 Operating Speeds: Variable speeds (760 1150 1630 2180 3070 RPM) allow you to target in the exact speed that works for your project, it does the job more conveniently and precisely than a handheld drill.
- Compact Construction: The frame of the bench top drill press consists of cast iron to ensure durability and accurate drilling. The worktable can bevel 45 degree left and right for angled drilling. The base contains predrilled holes for mounting onto a bench or work stand. The slotted table allows for mounting clamps and vises for effective work-holding.
- Useful Accessories: 2-1/2 inch jaws open up to 2-1/10 inches, 13 pcs drill bit set range from 1/16 to 1/4 inch, universal and necessary for various applications including but not limited to wood, plastics, and metals.
- Warranty: with CSA Certification, BILT HARD aims for quality followed up with quality customer service directly provided by manufacturer. The item is free from defects in materials and workmanship 90 days since purchase.
Milescraft 1318 Drillmate Drill Guide with chuck
- Perfect for straight or angled drilling, drilling on the edge of a board or on round stock
- Attaches to all 3/8″ And 1/2″ Power drills and it also includes a 3/8″ Capacity chuck with key
- Angle cuts of 45 Degree to 90 degrees, with a built in angle read out in the all metal base
- Centering channels built into the bottom of the base, to accommodate drilling any round stock up to 3 inches in diameter
- Adjustable depth stop and spring action control of the head
Irwin Tools Drill Press Vise, 4″, 226340
- Slotted base for easy installation and positioning
- Textured jaws for secure gripping
- 4.5 Inch jaw capacity perfect for light duty tasks
- Lightweight and portable
- Crated of forged iron for long-lasting durability
WEN 4276 2.1-Amp 6-Inch Bench Grinder with Flexible Work Light
- 2.1-Amp motor
- 3450 RPM at no load
- 6 in. by 3/4 in. wheels, 1/2 in. arbor size
- Lightweight design weighs in at 16 lb.Lamp:120V, 40W (Bulb not included)
- Worklight for maximum precision and visibility
WEN 4212 10-Inch Variable Speed Drill Press
- Spindle travel of 2-2/5 in. with easy to read, adjustable depth stop for accurate and repeatable drilling operations
- 8 in. x 7-2/3 in. cast iron worktable features rack and pinion height adjustment and bevels up to 45 degrees left and right
- Laser target your drilling operation marked with an X-pattern display
- Includes drill press, mechanical variable speed, 1/2 in. keyed chuck and key, laser, and tools for assembly
WEN 423DPV 3-Inch Cast Iron Drill Press Vise
- Grip woods, metals, plastics and more
- Cast iron construction provides stability to drilling operations
- 3-inch jaws open up to 3-1/10 inches with a 1-inch throat depth
- Includes four onboard mounting slots to securely fasten the vise to a drill press table
- Universal design compatible with the majority of drill presses on the market (see images for base dimensions)
WEN 4214 12-Inch Variable Speed Drill Press,Orange
- Infinitely variable speed ranges from 580-3200 RPMS. Mechanical variable speed delivers equal torque throughout the range. LED read out displays speed.
- Spindle Travel of 3-1/8″ with easy to read, locking linear depth stop for accurate and repeatable drilling operations. Front to the back of the motor is 22 inches
- Quill diameter of 2.17 inches. Durable 2/3hp induction motor develops ample torque and power. Motor: 120 V, 60 Hz. Laser Module: Class III
- 9-1/2 x 9-1/2″ cast iron worktable features rack & pinion height adjustment and bevels up to 45 Degree left & right. Width with the handles: 14-1/2″
- Includes drill press, mechanical variable speed, laser, table roller extension, 5/8″ keyed chuck & key, tools for assembly.Drill press Height from the Floor to the top: 37 inch
Hardware Factory Store 2 Way 4-Inch Drill Press X-Y Compound Vise Cross Slide Mill
- Durable cast iron construction, Powerful serrated steel jaws
- 4 Inch Wide Jaw, Cold rolled steel screws
- 2 swivel crank handles for adjusting vise front to back and left to right, Bolt down slots for securing
- Hinged vise crank handles drops out of the way, Designed for woodworking and metalworking
- 3.5 Inch throat opening, 5 Inch longitudinal and 4.5 inch cross travel
Milescraft 1312 DrillBlock- Handheld Drill Guide
- Centerlines ensure accurate alignment when drilling into various surfaces
- Non-slip feet holds the Drillblock in place while preventing both slipping and marring on wooden work pieces
- The two product v-grooves allow for usage on corners and even cylindrical surfaces too
- Package dimensions:3.05″L x 5.33″W x 14.48″H
Drill Press Stand, Universal Adjustable Aluminum Bench Clamp Desktop Drill Holder Workbench Repair Support Tool Drill Press Table Drill Stand with Single Hole Aluminum Heavy-duty Base
- ✔Packing Include: 1 x Base ,1 x Column bar ,1 x Rocker ,1 x Lower limit Fixed sleeve ,2 x Adjustable plastic fixed sleeves ,1 x Hex wrench 5mm (Not contain drills, flat-nose pliers, wood!
- ✔Accurate Press Stand: This drill stand is ideal for holding your drill steady during use and allows for much more accurate drilling than hand-held operation.The vise is durable and lightweight, and it is a very portable tool.
- ✔Heavy Duty: Electric drill press stand constructed with aluminum alloy base,solid column bar,durable to use.
- ✔Double Holes Workstation: 2 mounting holes bench drill press stand base for drilling collet 38 or 43mm/1.7″ or 1.48″.
- ✔Satisfied Warranty:If you have any problem with the product, please feel free to contact us.
As an Amazon Associate I earn from qualifying purchases.